How to Install Your Own Luxury Vinyl Flooring


luxury vinyl flooring in seattle wa

When it comes to affordable ways to put new flooring in your home, one of the easiest and cheapest options to go with is luxury vinyl flooring in seattle wa. However, you will also face the choice of whether you should have it professionally installed or whether you’d like to handle it on your own.

If you decide to tackle the installation of your luxury vinyl flooring on your own, use some of this information to make it as easy as possible.

Installing Luxury Vinyl Flooring

When you’re installing luxury vinyl flooring, first take measurements of the room and then decide on what type of flooring that you’d like. Decide whether you will need padding under the floor, as well. If so, purchase it first.

For a typical 8×8 foot room, you’ll need about 20 square feet of luxury vinyl flooring. Cut your decorative sheet down to size by laying it on top of the vinyl and using an X-ACTO knife to cut around the perimeter. Remove any excess pieces with scissors before installing it into place. You should also use scissors or an X-ACTO knife to cut out holes for doorways and outlets as necessary. Be sure not to make these cuts until after you have your flooring in place.

When you’re ready to install the flooring, start by flipping it over so that the adhesive side is on top and then begin to glue it into place. If desired, lay down a polyethylene vapor barrier beneath the vinyl prior to installation. Next, use an RTV silicone seam sealer around any cuts or seams to create a water tight seal and then press the flooring into position. Finally, once everything is in its proper spot, spray the area with some water from a spray bottle and allow it to sit for several hours before walking on it or moving furniture back onto it.

As you can see, installing this kind of flooring is simple enough, and can be done in a weekend by anyone who has the time to dedicate to the task. If you would like, give it a shot on your own and see how simple it can be! If you don’t have the time, it is perfectly okay to get in touch with floor installation experts for assistance.

Product Notification Tips


The ultimate goal of a business is to ensure that people know about a product and that they can use it safely.  When products are released onto the market they are given a set of instructions, ingredients, notifications and more.  All of these points of information are located on labels.  When it comes to label printing in Asheville, these companies need to ensure that everything is accurate and people can access the information easily.

Review the content

label printing in Asheville

Before you print a label, you want to ensure that you review the content.  You want to ensure that there are no typos, the quantity of each listed item is correct and that if any specific instructions are given for a specific group that they match up.

Make it prominent on the package

If you are printing on a package or on the product directly, it is important that you have the label in a place where it can’t be missed.  In most cases this is done on the back of the product.  One place that you don’t want to have important information is the bottom of the packaging.  If you have information on the bottom it will be the last place people will look if at all.

Colors and fonts

Don’t get fancy with your labels.  You want to have standard white labels with black font.  When you have this combination, it is easy to read and locate.  If you have a colored background, different colored fonts or even fonts that are hard to read, then people will pass over your product in favor of something they are more likely to understand.

Meets all guidelines

After you have the information and your outline you want to cross all of your T’s and dot all of your I’s and ensure that you meet all the guidelines for your industry.  If you fail to do that, then your labels will be inaccurate and you could end up causing harm.